Pre-Service Checks> Washing Machines

Washing machine won’t turn on..

Check to see if power cord is plugged into the power point and the power point works. An easy way to check is to plug another working appliance into the power point such as a hair dryer etc. If power point is working check if the main switch on the washing machine is turned on and the door is closed properly. If it still does not work call for a service.

Washing machine not draining. .

Check to see if the outlet hose is not blocked. The main reason usually is a blockage in the drain pump. The drain pump is located at the bottom of the washing machine on the right or left hand side usually behind a door or cover. If possible bail the water out first or place a container under the pump insert before removing to catch the water. Remove the filter and check for blockages around the pump impellor. If it still does not work call for a service.

Washing machine leaking..

Check the inlet and outlet hoses are not damaged check the inlet hose washers are not damaged check the hose fittings are done up tight check the door seals are clean and in good condition if it still leaks you will need to call for a service.

Washing machine not filling with water..

Check the taps are turned on and working you can also check the inlet hose is not kinked and the filter washers inside the end of the hoses are not blocked if there is still no water entering you will need to call far for a service.

Washing machine leaving marks on washing..

Check the filter in the drain pump is not dirty remove and clean it. If it is clean. The problem may be insufficient water is entering the machine. Check the taps are turned on and working, plus you can also check the inlet hose is not kinked. Run a hot wash through the machine using some Bi-Carbonate of Soda, and make sure your using a high quality detergent. It may also be that it is not heating you will need to call for a service.